Galvanized Steel roller shutter door machine with punching holes device
Базовая информация
Модель: ZT-009
Описание продукта
metal roller shutter door guide rails roll forming machine
The shutter door machine is used to make the shutter door slats for making the steel curving doors. the shutter door machine including below parts:
the decoiler, the leveling, the roll forming machine and the receiving table.
please check below new finished shutter door machine lines.
there are single shutter door machine and double production line shutter door machines too.
that is to say, you can design the machines in one table, and you can design the machines in double table, with other profiles together.
The Perforated shutter door making machine perforated shutter door roll forming machine can finish the shutter door flats well with high quality. the Perforated shutter door making machine perforated shutter door roll forming machine including below parts: Manual decoiler, the power pressing,the leveling, the main roll forming machine, the hydraulic cutting.
here is the Perforated shutter door making machine perforated shutter door roll forming machine leveling parts. it sued to make the steel coil flat.
this machine is with gear transmission. and also the machine can be with the gear box transmission.
below is the main details specifications of the shutter door:
|
Perforated Shutter door roll forming machine |
|||
|
Customer requirement:
Thickness: 0.8-1.0mm.
|
|||
|
Process for the whole production line: Decoiler---- perforation machine--- entry leveling---- roll forming machine---- shearing system--- run out table
|
|||
|
S/N |
Name |
Parameter |
Picture |
|
1 |
Decoiler |
Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system. a. Coil inner diameter: 450-550mm
b. Coil
max width: 300mm |
|
|
|
perforation machine
|
a.Material of mold: Gcr12MoV quenched b.Power: 3kw c.Punch speed:8m/min d.Thickness: 0.8-1.0mm It is a independent machine to punch the holes, you can remove this part when you customer doesn't need the holes. |
 |
|
2 |
Entry leveling |
This part will level coil to make sure it is neat clean and straight. |
|
|
3 |
Roll forming machine |
a. Number of forming steps: 12 stations b. Shaft material: 45# steel with quenched treatment, precision machined, The diameter: ￠50mm c. Roller material: bearing steel with quenched treatment d. Transport: by gear e. Forming speed: 5-15m/min (it can be
adjusted by your demand) G. Voltage:380v, 50Hz,3 phase h. Structure:Memorial arch frame I. Size of machine:5.5m *0.8m *1.2m J. weight:4.6T |
|
|
4 |
Shearing system |
a.The material of blade: Cr12Mov, Hardening HRC 58-62℃ b.Length Tolerance:3m±1.0mm C. Power supply: Hydraulic station |
|
|
5 |
Hydraulic station |
a. Hydraulic motor Power:3kw b.Hydraulic oil: 46# c.Hydraulic pressure : 12Mpa
|
|
|
6 |
PLC station |
PLC control system, we will take Delta . You can set the cutting length in the PLC. |
 |
|
7 |
Run out table |
It adopts welded steel and supported roller to transmit the products. |
|
|
8 |
Payment: 30% T/T in advance and balance 70% after inspection confirmation before shipment. Delivery time :30 days Container need: one 20` |
||
|
9 |
1. One year, and we will provide the technical support for the whole life. 2. Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD 80/person/day for salary. 3. Need one technician. 4. Training time: one week (contains the time of installation and adjustment) |
||
Группа Продуктов : Роликовые затвор двери формовочная машина